Connecting to Multiple Devices

You can easily manage multiple CamCrusher devices through the app — for example, if you have one in each car.

To connect to an additional or new device:

1. Open the CamCrusher app.

2. Go to Options Page → Settings → Connections.

3. Under Available Devices, choose the device you’d like to connect to.

4. The app will automatically pair and confirm with a brief light flash on the CamCrusher.

⚠️ Tip: For best results, keep your CamCrusher device within 4 feet (1.2 meters) of your phone during the initial connection.

Managing Connected Devices

The Connections screen is divided into two sections: Paired Devices and Available Devices.

Paired Devices

• These are devices you’ve already connected to your CamCrusher app.

• You can rename a paired device by tapping the ✏️ pencil icon, entering a new name, and pressing Submit.

• You can unlink a device anytime by pressing the Unlink button — the device will show as red (disconnected) once unlinked.

• To delete a device completely, tap the 🗑️ trash can icon.

• Connected devices appear in green to indicate an active link.

Available Devices

• Displays nearby CamCrusher devices ready for pairing.

• Tap on a listed device to connect — pairing is automatic and takes only a few seconds.

Minimum Software & Hardware Requirements

To use CamCrusher, you must install the CamCrusher app on a compatible iOS or Android device that supports Bluetooth.

Supported Devices

CamCrusher has been tested and verified to work with:

• Apple: iPhone 8 or newer (iOS 16+)

• Google Pixel: Pixel 4 or newer

• Samsung: Galaxy S10 or newer

• OnePlus: OnePlus 9 or newer (OxygenOS 13.1+)

• Motorola, Sony, and other major Android devices that support Bluetooth 5.0+

Note: Devices running iOS 15 or Android 9 and earlier are not compatible. Upgrade your OS or device to continue using the CamCrusher app.

Optimal Phone Settings for Connectivity

If you’re having trouble keeping your CamCrusher connected, make sure your phone meets the minimum software requirements and that you’re running the latest OS version.

General Tips

• Ensure Bluetooth ON and Airplane Mode OFF.

• Keep the CamCrusher app running in the background (do not force close).

• Disable Low Power Mode (iOS) or Battery Optimization (Android).

• Enable Location → Always Allow and Precise Location.

• Ensure Background App Refresh / Background Data Usage is ON.

Android Device Optimization

Samsung

• Go to Settings → Battery → App Power Management, set CamCrusher to “Apps that won’t be put to sleep.”

• Enable Background Data Usage and Allow App While Data Saver On.

• Disable Battery Optimization for the CamCrusher app.

Google Pixel / Motorola

• Battery Optimization: set to Don’t Optimize.

• Enable Background Data and Unrestricted Data Usage.

• Turn off Automatic Battery Saver.

OnePlus

• Disable Battery Optimization, Sleep Standby Optimization, and Advanced Optimization.

• Allow the CamCrusher app to run in the background at all times.

Huawei / LG / Other Manufacturers

• Disable Power Saving Mode and Background Restrictions.

• Allow the CamCrusher app to stay connected when the screen is off or the phone is idle.

• Set the app to Unrestricted Battery Usage.

💡 Tip: If your connection occasionally drops, open the CamCrusher app once before driving to refresh the Bluetooth handshake.

Connectivity & Troubleshooting Tips

1. Keep the app open in the background.
   Closing it fully may require a manual reconnect next time you start your car.

2. Stay up to date.
   Update both your phone’s OS and the CamCrusher app regularly to avoid compatibility issues.

3. Reboot Bluetooth.
   If your device won’t reconnect, toggle Bluetooth off/on, then reopen the CamCrusher app.

4. Avoid switching between devices mid-trip.
   Only one phone can actively control a CamCrusher at a time.